effectsdatabase | 7 years ago
Totally Wycked Audio DM-02 Dynamorph - Envelope-Controlled Harmonic Generator:
http://www.effectsdatabase.com/model/twa/dm02
Michiel plays in these bands:
Ian Kevin (Joy Division tribute): https://www.facebook.com/iankevinjoydivision/
Zero Moment Point: https://www.facebook.com/Zero-Moment-Point-1018765434846124
SIGNAL CHAIN:
Bass: Fender MIA P-bass with fairly new La Bella flats - TC Electronic Alter Ego (looper setting) - TWA Dynamorph - Focusrite iTrack Solo - iPad with Tape-app (Focusrite)
Speech: internal mic from my smartphone
DYNAMORPH CONTROLS:
ECDYSIS (Drive) – Controls the amount of signal level going into the circuit’s diode array. More drive yields more apparent change to the distortion’s EQ components; effectively “morphing” the tone.
CHRYSALIS (Gain) – Controls the output level of a high-gain preamp that sits before the rectifier array in the circuit. Gain makes the Drive control hit the rectifiers harder - a lot harder. When this occurs, more complex, thick harmonics with compression and increased sustain are some of the results.
AMETABOLY/HOLOMETABOLY (Dry/Effect) – Blends between clean signal (Ametaboly) and morphed signal (Holometaboly). Turn CCW for more Dry, turn CW for more Effect.
INSTAR (Threshold) – When Morph is set to ON, this control sets the trigger point at which the drive level will increase from zero to wherever it is set on the Drive control.
GESTATION (Rate) – When Morph is ON, this control determines how quickly the drive will swell from zero to full. Turn CW for faster gestation period.
MODE (OVID/KAFKA) – This switch selects between two different overall EQ curves for the effect. Ovid is fuller-sounding, while Kafka has more emphasis in the high frequency range.
MORPH (ON/OFF) – Turns the envelope-detector function of the pedal ON/OFF.
EXP – Connect an external Expression pedal (Roland EV-5 recommended) to control the amount of drive that will hit the circuit’s diode array. NOTE: Instar control should be set to zero (fully CCW).
