Old Blood Noise Endeavors | 8 years ago
Well, we tried for a live stream. Turns out we don't have the wifi for it. But no sweat, here's the video as it was shot and edited live.
Video Produced and Directed by Jarod Evans and Black Watch Studio in Norman, OK.
The Fault Overdrive/Distortion is the drive you didn't even know you needed. It can push your amp over the edge, provide a sensitive drive for a clean signal, or act as an all out distortion for your chugging rhythms or singing leads or noise experiments. A Bypass switch turns it on and off. Volume makes it louder. Gain 1 sets the intensity of the first gain stage, and can go from light and sparkly to tight and crunchy.
Low, Mid, and High each cut or boost their respective frequencies - scoop it, hump it, flatten it, whatever your heart desires. Low is a 100 Hz shelf filter, Mid is 500 Hz bell, and High is 3 kHz shelf.
Gain 2 is activated by the Gain 2 footswitch - if it's off, it does nothing. If the knob is all the way down, it does nothing. But turn the switch on and the knob up and you'll find increasingly heavy distortion in a pedal you thought was only an overdrive.
Video by Old Blood Noise Endeavors, Atria Creative, and Jarod Evans
http://atriacreative.co
http://oldbloodnoise.com
