MooerAudio | 6 months ago

#mooer #mooeraudio #mooerpedals #primep2 #pedal #guitar #firmwareupdate #guitarpedals #pedalboard #guitarist

PRIME P2 Optimization and Upgrade Details
1. Optimization of high-frequency noise issues on P2:
2. Improves playback delay and synchronization issues with drum machines in loop recording mode. Fixes bugs in drum machine sync mode by changing the wireless pedal control for drum machine switch to pedal D, making it effective upon press to enhance real-time control.
3. Advanced fine-tuning mode for parameter adjustment. Press and hold the parameter bar until you feel a vibration, then slide left or right, the parameter will increase or decrease by the smallest allowable amount. Release the finger from the screen to automatically exit fine-tuning mode. (Vibration needs to be manually enabled on some phones).
4. 10 new effect models for OD module
5. Additional 10 new BASS amp models, and 10 new BASS cabinet simulations.
6. Incorporates 30 authorized Choptones guitar cabinet models (CT) within CAB.
7. Increased adjustable range for the tuner base frequency from 430Hz to 445Hz. Adds base frequency adjustment controls to the P2 touch screen interface.
8. Optimization of the Cloud Official Area in the APP. Expands the GNR area with divisions for Preamp and Entire sampling files. Adds quick filter tags to the filtering function.
9． Wireless pedal anti-misoperation optimization: the combination of B and C footswitches entering the "LD" mode requires a pressing of 0.3 seconds to be activated.
10. Modification of Bluetooth Audio Playback. Resolves the phase inversion issue between the left and right audio channels.

*************Important Notice************
Due to changes in the base frequency of the tuner in this update, after updating, it will display 435Hz.
Users need to manually adjust back to 440Hz or reset to factory settings to return to the default 440Hz.
It is recommended to back up your tones before resetting your device.

**************How To Update***************
1. Turn On the P2, connect it to a computer via USB cable.
2. Download and install the latest version of Prime software from mooeraudio.com.
3. Open the editor software, select firmware update to start updating.
4. Wait for a few seconds until it completes, the P2 will reboot automatically.
5. Download the latest Prime P2 APP into your mobile device

#mooer #mooeraudio #mooerpedals #PrimeP2 #pedal #guitar #firmwareupdate #guitarpedals #pedalboard #guitarist