Disaster Area Designs | 3 years ago
This is an update for the new DMC.micro Pro + DMC.micro Classic (with 2.0+ firmware) and the Source Audio C4 / Ultra Wave / Spectrum.
DMC.micro Classic 2.0 firmware is here: https://disasterareadesigns.com/dmc-beta
DMC.micro Pro available here: https://disasterareadesigns.com/shop/p/dmc-micro-pro
Factory reset C4: Power on while holding footswitch, WARNING this will erase your presets so back them up to the Neuro Desktop or your online account for Neuro App first.
Factory reset DMC.micro Pro / Classic: Power on, wait until the display lights, hold both footswitches and wait for the countdown to finish.
Set up DMC.micro for USB control: Hold both buttons to enter setup, navigate to FACT RESET, hold left button to edit. Tap left until you see "C4," then hold the left button to reset.
Power cycle DMC to reset the USB port.
Connect gHOST adapter cable to DMC USB port, then connect USB cable to gHOST adapter and C4 / Ultra Wave / Spectrum.
Tap buttons on DMC, the C4 activity light should flash.
All done!
If the connection doesn't work, try the following:
Power cycle both units, then plug + unplug USB cable
Try a different USB cable or adapter
Enable "Skip USB MIDI Power Check" in C4 setup with Neuro App / Desktop
